NelcoBlog

Use of Cable Raceway in Aviation Industry

There are a lot of things that go on behind the scenes in the aviation industry that most people don’t think about. Whether you have a private airport, a helipad for tours, or anything else, you know that you’ve got people walking around all the time – and there are a lot of cables and cords that may be in the way.

Cable Raceway

Cable Raceway Latching Duct
Cable Raceway

You need to have cables and power lines on the ground from time to time in order to power up one piece of equipment or another. These cables and power lines are a trip hazard. You know it and so does everyone around you. A cable raceway is a simple device that allows you to slide your cables and cords into to keep them organized.

When the cables and cords are organized with a cable raceway, there is less chance of someone tripping and falling. You can invite people behind the scenes in order to give them a tour of the aircraft. And you can do so without worrying about what will happen to them.

Even if you tell people to watch where they are walking, distractions occur. There are a lot of things taking place at an airport or at a helicopter landing that takes people away from what they should be doing. If you don’t have the raceway in place, they will inevitably trip on the wire and it will be your fault. This can all be avoided with a little pre-planning.

Think about all of the times where you will have cables and wires on the ground. You may have them in your office, in the lobby, and outside where the planes and helicopters are. It all takes place behind the scenes, but there are going to be times when people are in these areas.

You don’t want to cause an unsafe work environment for you, your employees or your customers. This is why you have to focus on the wires and cables. If they are not organized, they are going to be easily caught up under foot and someone is going to go down as a result of it. If you don’t organize the wires from a safety standpoint, do it from an operational one. If a cord gets pulled out of the socket, it may cause damage to the unit or to the plug itself – and this can get expensive.

Focus on safety and operations by keeping the cords and wires organized. The best way to do this is with a cable raceway.