In Media Technology at [our] university we use a lot [of] the Nelco cable mesh in our classrooms either it be on our cables for laptop uses or the cabling tethering the lectern to the wall. We also use a lot of the various Velcro to help manage cabling and holding down our equipment in our lecterns along with the cable ties. We have been using these products for over 10 years and still going strong. And lets not forget the terrific service they have provided over the years either it being a simple request to a complex one they have always been on top of it.
Nelco Products™ solder sleeve shield terminators are cable terminators made to exacting specifications. The outer jacket is made from fluoroplastic and is loaded with the exact amount of pre-fluxed solder necessary to provide a perfect connection every time. All you need to do is heat it up with a heat gun or an infrared source until the solder has melted.
The thermoplastic sealing rings at the ends of the STS' melt and flow during the heating process providing a tight environmental seal. Each heat shrink solder sleeve cable terminator provides a rugged and sealed soldered wire connection that is completely insulated, encapsulated, and strain relieved for unmatched strength and durability. The solder terminator sleeves are offered with (part number H-ML-x) or without lead (part number H-M-x) pre-installed, in a wide range of sizes, and in convenient package quantities of 100 sleeves per package. The STS without lead meet MIL Spec, SAE AS53519 / 1 and the STS with lead meet SAE AS53519/2. Each terminator has an environmental operating temperature of -67°F to 302°F (-55°C to 150°C).
To request a quote, click “Add to Quote Cart” to add the product to your RFQ cart. To submit your RFQ, click on the Cart icon and then “Submit Quote Request”. If you have additional questions, call 1-800-505-6352 and a customer service specialist will assist you.